3R Anyty Operating Instruction page 34

Next, please charge battery of monitor.
Connect attached adaptor to the charging port on left side of the LCD Monitor, and then connect other
side to household wall outlet. (100V)
A part of monitor at left up side will light red during charging period.
The red light will turn off when the charging is complete.
Charging time will be about 3 hours. It lasts about maximum 2hours in full power condition.
Attention AC adaptor is only for LCD Monitor. Please, DO NOT use it on Microscope.
It could be the cause of breakdown or heating.
During charge period
Charge complete
Press power button at top side of LCD Monitor to turn the power on.
Light on top left side will be green and monitor will be turned on.
Please press power button longer to turn the power of.
Red light
Light off
33