Step 2 Install The Hardware - Belkin Wireless G Desktop User Manual

Installing and Setting Up the Card Installing and Setting Up the Card
Step 2 Install the Hardware
2.1
During the install process, you
will be prompted to insert your
Card. To do so, shut down your
computer and disconnect your
power.
Note: Touch any metal part of the
case to discharge static electricity,
to avoid damage to the product or
your computer.
2.2
Remove the screws behind your
computer case that secure the
computer cover and remove
the cover.
2.3
Locate an empty PCI expansion
slot. It is usually white in color.
Confirm that the Card will fit into
the slot you have chosen. Keep
in mind that the included antenna
needs to be oriented with the top
pointing up. If there are cables
and other connectors in the way,
try to pick the PCI slot that has
the fewest obstructions to the
correct positioning of the antenna.
2.4
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, place
it in a safe place, as you will be
using it to attach the Card to the
computer later.
2.5
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
10 10