Vivotek FE8181 User Manual page 63

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Profile Settings page as shown below.
Please follow the steps below to setup a profile:
1. Select the Enable and apply this profile checkbox.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Configure the White balance and Image adjustment settings in the following columns. Please refer to the
previous page for detailed information.
4. Click Save to enable the settings and click Close to exit the page.
2011/03/13 17:08:56
VIVOTEK
User's Manual - 63