Vivotek FE8181 User Manual page 220

VIVOTEK
8.13 Preset Locations (capability.ptzenabled,
FE8181)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE
addpos <Text string less than
30 characters>
channel <0~(n-1)>
delpos <Text string less than
30 characters>
return <return page>
8.14 ePTZ Preset Locations (capability.eptz > 0,
FE8174, FE8181)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
220 - User's Manual
path according to the current path.
DESCRIPTION
Add one preset location to the preset list.
Channel of the video source.
Delete preset location from preset list.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
DESCRIPTION
Channel of the video source.
not used in FE8174,
not used in