Vivotek FE8181 User Manual page 40

VIVOTEK
Video Stream: This Network Camera supports multiple streams (stream #1 ~ #3) simultaneously. You
can select any one of them for live viewing. For more information about multiple streams, please refer to
page 73 for detailed information.
Manual Trigger: Click to manually enable or disable an event trigger. Please configure an event setting
before enabling this function. A total of 3 or 4 event settings can be configured. For more information
about event setting, please refer to page 113. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the "show
manual trigger button" checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Start to Auto Pano
Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous
rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already
shows the full coverage.
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Pan /Tilt /Zoom /Panoramic/Rotate speed: Adjust the speed of these controls when exerted:
Pan speed
-5
-4
-3
-2
-1
0
1
2
3
4
5
Configuration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 49.
Configuration: Click this button to access more of the configuration options provided with the Network
40 - User's Manual
Left
Down
Zoom Out
Tilt speed Zoom speed
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
0 0
1 1
2 2
3 3
4 4
5 5
Up
Return to Home Position
Right
Zoom In
Stop Auto Pano
Panoramic
speed
-
-
-
-
-
0
1
2
3
4
5
Slower
Faster