Vivotek FE8181 User Manual page 190

VIVOTEK
uart_httptunnel <boolean>
transmission_mo Tx,
de Rx,
Both
network_wire <boolean>
network_wireles <boolean>
s
wireless_s802do <boolean>
t11b
wireless_s802do <boolean>
t11g
wireless_encrypt <boolean>
_wep
wireless_encrypt <boolean>
_wpa
wireless_encrypt <boolean>
_wpa2
wireless_beginch 1 ~ 14
annel
wireless_endcha 1 ~ 14
nnel
derivative_brand <boolean>
npreset 0, <positive integer>
eptz 0, <positive integer>
190 - User's Manual
0 0/7
Tx 0/7
1 0/7
0 0/7
0 0/7
0 0/7
0 0/7
0 0/7
0 0/7
255 0/7
255 0/7
1 0/7
20 0/7
7 0/7
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
Indicate whether to support HTTP
tunnel for UART transfer.
Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
Indicate whether to support
Ethernet.
Indicate whether to support wireless.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless
802.11g.
Indicate whether to support wireless
WEP.
Indicate whether to support wireless
WPA.
Indicate whether to support wireless
WPA2.
Indicate the begin channel of
wireless network
Indicate the end channel of wireless
network
Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is
true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX
is excepted)
Number of preset locations
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or
not.
Bit 1 => stream 2 supports ePTZ or