Electrical Connections - JVC KD-S13 Instructions

INSTALLATION

ELECTRICAL CONNECTIONS

* 2
× ×
*
*
×
*
* 1 Not supplied for this unit.
* 2 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be
turned on.
* 3
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if
coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
* 4 Signal cord (not supplied for this unit)
4 – EN
* Not supplied for this unit.
×
*
* 1