Zone Control Systems - Energate FZ100C Installation Manual

8.3 Zone Control Systems

An out-of-the-box Energate thermostat is compatible with most zone control systems. Each zone requires a separate
thermostat, because a single Energate thermostat is not capable of supporting multiple zones by itself.
To use it with a typical zoning panel, connect the R, C, and other inputs as appropriate to the zone control wiring panel.
For each zone, there should be an appropriate array of terminals similar to those normally located on the wiring panel
of the HVAC equipment.
Treat each array of terminals, one for each thermostat zone, as a separate piece of HVAC equipment, and follow the
instructions from earlier in this guide for that type of HVAC equipment.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO ENERGATE INC. NO PART OF ITS CONTENTS MAY BE DISCLOSED OR CONVEYED TO,
USED BY, OR COPIED TO A THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT BY ENERGATE INC. PRINTED COPIES WILL BE CONSIDERED UNCONTROLLED.
AW000873-G 41