Manual Preset - JVC KD-LX10 Instructions Manual

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
2
1
2
3
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
3
Select the band.
1 Press SOURCE (ATT) to select the tuner as the source.
2 Press BAND to select the FM1 band.
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
Press and hold the number button (in this example, 1)
for more than 2 seconds.
FM band number and "MEMO"
appear alternately for a while.
1- 1-
1 2
2
9