Settings; Selecting A Preset Sound Mode-C-Eq - JVC KD-DVH426 Instructions Manual

Selecting a preset sound mode — C-EQ
Indication (For)
USER (Flat sound)
ROCK (Rock or disco music) +03
CLASSIC (Classical music)
POPS (Light music)
HIP HOP
(Funk or rap music)
JAZZ (Jazz music)
Adjusting the sound
1
2
Adjust the level.
BAS TRE LOUD
(bass) (treble) (loudness)
00 00 OFF
+01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
BAS 1 (bass)
*
Adjust the bass.
TRE (treble)
* 1
Adjust the treble.
FAD 2 (fader)
*
Adjust the front and rear speaker balance.
BAL (balance)
Adjust the left and right speaker balance.
LOUD 1 (loudness)
*
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOL.A 3 (volume adjust)
*
Adjust and store auto-adjustment volume
level for each source, comparing to the FM
volume level.
VOL (volume)
Adjust the volume.
1
* When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including "USER."
2
* If you are using a two-speaker system, set the
fader level to "00."
3
* You cannot make an adjustment for FM.
"FIX" appears.
4
* Depending on the amplifier gain control
setting. (See page 21 for details.)
19
–06 to +06
–06 to +06
R06 to F06
L06 to R06
LOUD ON or
LOUD OFF
–05 to +05
00 to 30
(or 50) 4
*

SETTINGS