JVC KD-LX10 Instructions Manual page 27

To select the scroll mode
You can select the scroll mode for the disc information if it consists of more than 10 characters.
When shipped from the factory, Auto Scroll mode is set to "ONCE."
• ONCE: Scrolls only once.
• AUTO: Repeats the scroll (in 5-second intervals).
• OFF: Cancels Auto Scroll.
Note:
Even if the scroll mode is set to "OFF," you can scroll the display by pressing DISP for more than 1
second.
To change the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (AREA US settings).
You will have to change the channel intervals when using this unit in an area other than North
America and South America.
• AREA EU: Select this when using this unit in an area other than North and South America.
(9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM)
• AREA US: Select this when using this unit in North or South America. (10 kHz for AM and
200 kHz for FM)
Note:
If the channel intervals settings are changed, the names assigned to the stations will be erased
from memory. To reassign the names, see "Assigning names to the sources" on pages 28 – 29.
To select the external component to use
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE INPUT: To use the external component other than the CD changer
• CHANGER: To use the CD changer
To make the front panel look flat (hiding the control panel)
When operating the receiver using the remote control, you can hide the control panel to make
the front panel look flat. When shipped from the factory, "FLAT OFF" is selected.
• FLAT ON: The control panel will not come out when you turn on the unit.
To use the control panel, press 4
no operation is done for about 10 seconds, it automatically goes back into the
receiver.
• FLAT OFF: You can use the control panel normally.
Note:
When "FLAT ON" is selected, you can eject a CD by holding 4
so that the control panel comes out. If
.
27