Pioneer DV-PT100-S Service Manual page 97

5
2-17: CLUTCH ASSY/RING SPRING/CLUTCH
LEVER/CLUTCH GEAR (Refer to Fig. 2-17-A)
1. Remove the Polyslider Washer 1.
2. Remove the Clutch Assy and Ring Spring.
3. Remove the Clutch Lever.
4. Remove the Coupling Gear, Coupling Spring and Clutch
Gear.
1
Coupling Gear
Coupling Spring
Clutch Gear
NOTE:
1. In case of the Clutch Assy installation, install it with
inserting the spring of the Clutch Assy into the dent of
the Coupling Gear. (Refer to Fig. 2-17-B)
2-18: CASSETTE GUIDE POST/INCLINED BASE
S/T UNIT/P4 CAP/LED REFLECTOR
(Refer to Fig. 2-18-A)
1. Remove the P4 Cap.
2. Unlock the support 1 and remove the Cassette Guide
Post.
3. Remove the Inclined Base S/T Unit.
4. Remove the screw 2.
5. Remove the LED Reflector.
5
6
Clutch Assy
Ring Spring
Clutch Lever
Fig. 2-17-A
Clutch Assy
Coupling Gear
Fig. 2-17-B
6
7
Inclined Base S
Unit
LED Reflector
Screw Torque: 5 ± 0.5kgf•cm
NOTE:
1. Do not touch the roller of Guide Roller.
2. In case of the P4 Cap installation, install it with parallel
for "A" and "B" of Fig. 2-18-B.
3. In case of the Cassette Guide Post installation, install
correctly as the circled section of Fig. 2-18-C.
P4 Cap
[OK]
Cassette Guide Post
[NG]
Cassette Guide Post
DV-PT100-S
7
8
Cassette Guide Post
1
Inclined Base T Unit
P4 Cap
2
Fig. 2-18-A
"A" "B"
Cassette Opener
Fig. 2-18-B
Fig. 2-18-C
8
A
B
C
D
E
F
97