Confirmation Of Hours Used - Pioneer DV-PT100-S Service Manual

5

6.4 CONFIRMATION OF HOURS USED

PLAY/REC total hours can be checked on the screen.
Total hours are displayed in 16 system of notation.
NOTE: If you set a factory initialization, the total hours is reset to "0".
1. Connect the set to TV Monitor.
2. Turn on the POWER, and set to the VCR mode.
3. Press both CH UP button on the set and the FF button on the set for more than 2 seconds.
The Fig. 1 screen will appear on TV Monitor.
4. After the confirmation of using hours, turn off the power.
5
6
Fig. 1
DV-PT100-S
6
7
Initial setting content of MEMORY IC.
PLAY/REC total hours.
= (16 × 16 × 16 × thousands digit value)
+ (16 × 16 × hundreds digit value)
+ (16 × tens digit value)
+ (ones digit value)
7
8
A
B
C
D
E
F
77
8