Determine The Gate Bracket Position - Vector V400 Installation Manual

4. Secure the bracket to the wall with the most
appropriate means.
See page 14 for site considerations.

Determine the gate bracket position

Start with the operator fully retracted.
Turn out the actuator tube one or two turns.
5. Fit the gate bracket to the operator.
6. Fit the motor end of the operator to the wall
bracket.
7. Open the gate fully and temporarily clamp the
gate bracket to the gate.
The gate bracket must fit to a sturdy point on
the gate.
Consider using the optional gate adaptor kit.
Page 19
1 OR 2 TURNS