Operator Installation - Vector V400 Installation Manual

Operator Installation

Operator Installation
1. Determine gate opening angle and direction of
operator (inward or outward).
Alternatively the swing angle can be deter-
mined more accurately with the process
detailed on page 37.
2. Determine a suitable height for the wall
bracket.
The gate bracket must fit to a sturdy point on
the gate.
Consider using the optional gate adaptor kit.
3. Determine where to put the bracket according
to A and B values in the tables on pages 23 and
25.
.
OPERATOR MUST NOT FOUL AGAINST BRACKET
Take care to shorten
the wall bracket to
prevent interference
with the operator
CAUTION:
USE MECHANO KIT
120°
110°
100°
A
B
or or
Page 18
CLOSED
60°
70°
90° 80°
G at e B racket
For tables see page 23 or 25
CUT THE BRACKET
0°
Gat e openi ng angl e
120° 60°
100° 70°
110° 90° 80°
0°
Gat e openi ng angl e
120° 60°
70°
100° 110° 90° 80°