Adjusting The Speaker Volume; Monitor Adjustment; Touch Panel Calibration; Setting The Background Screen - Sony XAV-622 Operating Instructions Manual

Adjusting the speaker volume

You can adjust the volume level of each
connected speaker.
The adjustable speakers are "Front R" (Front
Right), "Front L" (Front Left), "Surround L"
(Rear Left), "Surround R" (Rear Right) and
"Subwoofer*."
* Adjustable only when a subwoofer is connected and
"Rear/Sub Out" is set to "Sub" (page 41).
1
While no source is selected, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch v/V to scroll, then touch "4.1ch
Speaker Level."
The setting display appears.
Back ATT
4.1ch Speaker Level
Front L Front R
Surround L Surround R
Subwoofer
Reset
Note
The subwoofer appears and the subwoofer key is
available only when "Rear/Sub Out" is set to "Sub"
(page 41).
4
Touch the speaker, then +/– to adjust
the level.
Repeat this step to adjust each speaker's
volume.
To restore the default setting, touch "Reset."
To return to the previous display, touch "Back."
.
Top
0

Monitor Adjustment

Touch panel calibration

Touch panel calibration is required if the
touching position does not correspond with the
proper item.
1
Touch "Source List," then
2
Touch "General."
The general setting menu appears.
3
Touch v/V to scroll, then touch "Touch
Panel Adjust."
The setting display appears.
4
Touch the targets in sequence.
The calibration is complete.
To cancel calibration, touch "Cancel."

Setting the background screen

You can select the screen theme, visualizer and
picture brightness for the background screen
according to your preference.
1
Touch "Source List," then
2
Touch "Screen."
The screen setting menu appears.
3
Touch "Screen Select."
The options appear.
4
Select the screen theme.
Touch "Screen Theme," then the desired type.
5
Select the visualizer.
Touch "Visualizer," then the desired type.
6
Select the picture brightness.
Touch "Day / Night mode," then one of the
following options.
"Auto": Switches the brightness
automatically when you turn the lights on.
(Available only when the illumination control
lead is connected.)
"Always Day": Fixes the brightness suitable
for daytime use.
"Always Night": Fixes the brightness
suitable for nighttime use.
To return to the previous display, touch "Back."
.
.
35