JVC GET0570-001A Instruction Manual page 72

Symptoms
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting
an iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective
owners.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
30
Remedies/Causes
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 15).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.