JVC GET0570-001A Instruction Manual page 70

Symptoms
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("READING" keeps flashing on the display).
• Tracks do not play back in the order you
have intended them to play.
• The elapsed playing time is not correct.
• The correct characters are not displayed
(e.g. album name).
• Bluetooth device does not detect the unit.
• The unit does not detect the Bluetooth
device.
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
28
Remedies/Causes
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select "OPEN" on the unit to connect
the device. (See page 11.)