Graco Baby & Toddler Car Seats Owner's Manual page 30

30 Step 8.
To fold the load leg for storage,
remove the car seat from the base
and press the two knobs down to
release.
WITH OR WITHOUT BASE:
Tighten belt as snugly as possible.
Twist and pull on car seat to be sure
the vehicle belt holds it tightly.
WARNING: DO NOT use car seat in
any vehicle seat position where
vehicle belt does not hold car seat
tightly.
NEVER leave a car seat or base
unsecured in your vehicle. A loose
car seat or base could be thrown
into a passenger in a sudden stop
or crash and cause serious injury
or death.
Using the
level indicator
Attached to the side of your car seat
is a level indicator to help properly
recline the car seat on the vehicle
seat. It is very important for your
child's safety that your car seat be
properly reclined. Proper use of the
level indicator requires that your
vehicle be parked on level ground
during installation of the car seat.
31
DO NOT use car seat in a very
upright position.
may drop forward and cause
breathing problems.
32
DO NOT use car seat in a very
reclined position.
put too much force on a child's
neck and shoulders.
29
The child's head
A crash could