JVC GET0633-001A Instruction & Installation Manual page 48

Category Menu item
IF BAND
Intermediate
frequency band
BUTTON ZONE
DISP ZONE
Display zone
ALL ZONE
DAY COLOR
NIGHT COLOR
MENU COLOR
FADER *
BALANCE *
LOUD
Loudness
VOL ADJUST
Volume adjust
3
* If you are using a two-speaker system, set the fader level to "00."
4
* This adjustment will not affect the subwoofer output.
14 ENGLISH
Selectable setting, [
• AUTO
• WIDE
COLOR 01 —
COLOR 29, USER
• BUTTON ZONE
• DISP ZONE
• ON
• OFF
3
R06 – F06
[00]
4
L06 – R06
[00]
• LOUD ON
• LOUD OFF
VOL ADJ –05 —
VOL ADJ +05
[VOL ADJ 00]
Initial: Underlined
: Increases the tuner selectivity to reduce
interference noises between adjacent stations.
(Stereo effect may be lost.)
: Subject to interference noises from adjacent
stations, but sound quality will not be
degraded and the stereo effect will remain.
: For settings, 16.
: For settings, 17.
: Changes the display and buttons (except for
EQ/BASS-TRE / DISP) illumination during menu,
list search and playback mode operations.
: Cancels.
: Adjust the front and rear speaker output
balance.
: Adjust the left and right speaker output
balance.
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
: Preset the volume adjustment level of
each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.
• Before making an adjustment, select the
source you want to adjust.
• "VOL ADJ FIX" appears on the display if "FM"
is selected as the source.
]