Important Safety Instructions - Ninja BL700-FS Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR NINJA
KITCHEN SYSTEM 1200
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit into
a polarized outlet only one way. If
the plug does not fit fully into the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. DO NOT modify the plug in
any way.
1. To protect against electrical shock,
2. Close supervision is necessary when
3. Never leave an appliance
®
.
™
4. Turn the appliance Off and remove
5. DO NOT abuse the power cord.
6. DO NOT operate any appliance with
7. DO NOT let the power cord hang
8. Always use appliance on a dry, level
9. Keep hands, hair, clothing, as well
10. CAUTION: Blade assembly is sharp,
11. Avoid contact with moving parts.
2
do not submerge the appliance or
allow the power cord to come into
contact with water or any other
liquid.
any appliance is used by or near
children.
unattended when in use.
the power cord from the electrical
outlet when not in use, before
assembling or disassembling parts
and before cleaning. To unplug,
grasp the plug and pull from the
electrical outlet. Never pull from the
power cord.
Never carry the appliance by the
power cord or yank it to disconnect
from electrical outlet; instead grasp
the plug and pull to disconnect.
a damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination,
repair or adjustment.
over the edge of table or counter or
touch hot surfaces such as the stove.
surface.
as utensils out of container while
processing to reduce the risk of
severe injury to persons or damage
to the appliance. A scraper may be
used but only when the appliance is
not running.
handle with care. When handling the
blade assembly, always hold by the
shaft.