Download Print this page

Important Safety Instructions - Ninja DETECT TB200 Series Owner's Manual

Power with blendsense technology

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
14 Extension cords should NOT be used with this appliance.
15 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power
cord to contact any form of liquid.
16 DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged
and pull the appliance off the work surface.
17 DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
18 ALWAYS use the appliance on a dry and level surface.
19 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
20 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
21 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
22 NEVER place a blade assembly on the motor base without it first being attached to the pitcher with
the lid also in place.
23 Keep hands, hair, and clothing out of the container when loading and operating.
24 During operation and handling of the appliance, avoid contact with moving parts.
25 DO NOT fill container past the MAX FILL or MAX LIQUID lines.
26 DO NOT operate the appliance with an empty container.
27 DO NOT microwave any container or accessories provided with the appliance.
28 NEVER leave the appliance unattended while in use.
29 DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose
a risk of the user being burned.
30 DO NOT process dry ingredients with the pitcher and Stacked Blade Assembly.
31 DO NOT perform grinding operations with the pitcher and Stacked Blade Assembly.
32 NEVER operate the appliance without lid in place. DO NOT attempt to defeat the interlock
mechanism. Ensure the container and lid are properly installed before operation.
33 Before operation, ensure all utensils are removed from container. Failure to remove utensils can cause
container to shatter and potentially result in personal injury and property damage.
34 Keep hands and utensils out of container while chopping to reduce the risk of severe personal injury or
damage to the blender. A scraper may be used ONLY when the blender is not running.
35 DO NOT open the pitcher's pour spout cap while blender is operating.
36 If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the
lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may
contact one of the blades and experience a laceration.
37 DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still
spinning. Allow the appliance to come to a complete stop before removing lid and container.
38 If the appliance overheats, a thermal switch will activate and temporarily disable the motor. To reset,
unplug the appliance and allow it to cool for approximately 30 minutes before using again.
39 DO NOT expose the container and accessories to extreme temperature changes. They may
experience damage.
40 Upon completion of processing, ensure the blade assembly is removed BEFORE emptying container's
contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the
container. Failure to remove the blade assembly before emptying the container results in a risk
of laceration.
41 If using the pitcher's pour spout, hold the cover in place on the container or ensure lid lock is engaged
when pouring to avoid risk of injury.
ninjakitchen.com
42 DO NOT submerge the motor base or control panel in water or other liquids. DO NOT spray motor
base or control panel with any liquid.
43 DO NOT attempt to sharpen blades.
44 Turn off the appliance and unplug the motor base before cleaning.
SAVE THESE INSTRUCTIONS
ninjakitchen.com

Advertisement

loading