End Of Operation - Fujitsu ScanSnap S510M Operator's Manual

■ End of Operation

Exiting "ScanSnap Manager"
Operation
Click and hold the mouse button on the ScanSnap Manager icon
select "Quit" from the menu.
HINT
Disconnecting the scanner
Operation
1. Close the paper chute to turn off the scanner.
⇒
The ScanSnap Manager icon changes to
2. Unplug the USB cable from your computer.
3. Unplug the AC cable from the power outlet.
HINT
32
To operate ScanSnap, "ScanSnap Manager" must be active (stay resident).
When you want to resurrect "ScanSnap Manager," select the destination where
ScanSnap is installed (generally, "Applications" - "ScanSnap") from Finder,
and then select "ScanSnap Manager."
(*You do not have to quit "ScanSnap Manager" under normal conditions.)
The scanner is turned on/off in conjunction with the computer or
by opening/closing the paper chute. Therefore, you do not have to press the
[POWER] button to turn on/off the scanner while it is connected to your com-
puter.
in the Dock menu, and
. The Power lamp goes out.