System Memory; Expansion Slots - Compaq ProLiant DL380 Setup And Installation Manual

1-10 Compaq ProLiant DL380 Setup and Installation Guide

System Memory

Expansion Slots

I
System supports 133-MHz registered SDRAM memory (Synchronous
DRAM).
I
Error Checking and Correcting (ECC) memory uses an error-encoding
scheme for memory error detection and correction. Specifically, this
feature detects and corrects single-bit memory errors.
I
System is expandable to 4-GB of memory (when available) installed in
dual-inline memory module (DIMM) sockets. Memory can be expanded
one module at a time.
The expansion slots on the riser board are configured as shown.
Figure 1-7. Locating ProLiant DL380 expansion slots. These expansion slots
on the riser board correspond to slots on the rear of the server.
4
3
2
1