How To Take A Measurement - Omron HEM-629 Instruction Manual

HOW TO TAKE A MEASUREMENT

1.
Press the START/STOP button. After all the characters
on the display are turned on, the monitor starts
inflating for measurement.
2.
Check the measured values. When the
measurement finishes, the deflation mark
flashes and the wrist cuff deflates.
3.
To stop measurement press the
START/STOP button to turn off the power.
• Even if you forget to press the
START/STOP button, the power will
turn itself off automatically in approximately 2 minutes.
4
.
The monitor exhausts the residual air when
the measurement is complete. The Heart
Symbol (♥) stops flashing and your blood
pressure and pulse rate display alternately.
SYSTOLIC mm Hg
DIASTOLIC mm Hg
12
PULSE/min