Selecting Sources - GRASS VALLEY INDIGO AV Mixer Quick Start Manual

Section 5 — Basic Operation

5.2 Selecting Sources

5.2.1 Video
Video Sources
Keys Sources, Auxes and Stills
Preview of Signal Transitions
Onscreen Preview
22
This section provides information on selecting sources as video and audio
signals, keys sources, and Stills.
Select video signals with the crossbar buttons (see Crossbars for Bus and
Source Selection on page 17). Use the
sources to the buttons.
See also Video Settings on page 13 for information on configuring video set-
tings.
The video signals for the program monitors are selected in the middle
crossbar row, labeled as
forms a hard cut to another signal.
Key and fill signals, and auxiliary outputs are selected in the top crossbar
row, labeled as .
BUS
The preset background involved in a signal transition together with the
selected modifications (for example, keys) is selected in the bottom
crossbar row, labeled
the selected preset background on the corresponding preview monitor
(LAH preview).
Use the
Onscreen Preview
to open/close the Onscreen Preview video overlay window.
SETUP
. Pressing another key in this row per-
BACKGROUND
. Pressing a key in this row shows
BACKGROUND PRESET
button in the upper left corner of the Touch Screen
INDIGO AV Mixer Quick Start Guide
main menu to assign video