Section 4 - Initial Settings; Power-On; Video Settings - GRASS VALLEY INDIGO AV Mixer Quick Start Manual

Initial Settings

4.1 Power-On

4.2 Video Settings

INDIGO AV Mixer Quick Start Guide
If you switch on your INDIGO AV Mixer for the first time or use a new
setup (i.e. you connected different or additional devices) you have to
adjust the video and audio settings after first power-on.
Use the power switch on the rear side to switch on your INDIGO AV
Mixer.
Figure 6. The power switch
Configure the video settings as needed, according to the connected
devices:
1. Select the main menu to make your settings.
SETUP
2. In the submenu, press the
VIDEO
set the signal Type for each (used) video input.
3. Press the button and select the desired Graphic Standard
Output
(resolution) and Type (PAL or NTSC).
4. If desired, in the
CONTROL PANEL
page 135, press
Button Assign
video Sources are routed to which Buttons on the Background
crossbar.
By default, the buttons are assigned corresponding to the number of
the video signal input channel, SD stills are assigned to buttons.
Section
button to list all video inputs and
Input
submenuControl Panel Submenu on
and set the video signal routing, i.e. which
4
13