Audio Settings; Example Setup - GRASS VALLEY INDIGO AV Mixer Quick Start Manual

Section 4 — Initial Settings

4.3 Audio Settings

4.4 Example Setup

14
To adjust the audio settings:
1. Select the main menu.
SETUP
2. In the submenu, press the
AUDIO
the following modes:
• : You can use the audio signals of eight stereo sources,
8 Stereo
deriving from RCA, TRS 1/4'', XLR, AES/EBU signals or even de-
embedded audio from video streams.
• : You can use seven stereo audio signals and two
7 Stereo, 2 Mic
microphones that are connected to LINE/MIC IN inputs.
• : You can use six stereo audio signals and up to four
6 Stereo, 4 Mic
microphones that are connected to LINE/MIC IN inputs.
3. If desired, in the
page 135, press
Fader Assign
audio source is routed to which fader in the Audio Control Subpanel.
By default, the faders are assigned according to the number of the
audio signal input channel, for example, the signal from audio input 3
is routed to fader
The following figure shows a possible setup:
Figure 7. Connections for a big event setup
Operation Mode
submenuControl Panel Submenu on
CONTROL PANEL
and set the audio signal routing (i.e. which
.
3
INDIGO AV Mixer Quick Start Guide
button to select one of