Connect To An Existing Audio System - Philips AW1000 User Manual

3
On the initial Setup page, tap Setup a new
speaker.
4
Read the general setup steps, then tap
Next.
Connect to an existing audio
system
Connect through the LINE OUT L/R sockets:
1
Connect a pair of RCA audio cables (red/
white; not supplied) to:
• the LINE OUT L/R sockets on the
back of the device.
• the audio input sockets on your
existing audio system.
2
Use controls of your existing audio
system to select the audio source that
corresponds to AW1000.
Connect through the OPTICAL OUT or
DIGITAL OUT socket:
1
Connect an optical or single RCA audio
cable (not supplied) to:
• the OPTICAL OUT or DIGITAL
OUT socket on the back of the device.
• the corresponding audio output socket
on your existing audio system.
2
Use controls of your existing audio
system to select the audio source that
corresponds to AW1000.
AUDIO IN AUDIO IN
EN 7