System Requirements; Connect The System - Philips CPWBS001 Instructions For Use Manual

Philips wireless base station instructions for use
Table of Contents

Advertisement

System Requirements

You must have an ISP that meets the following minimum requirements:
• Internet access from your local telephone company or Internet Service
Provider (ISP) using a DSL modem or cable modem.
• A PC using a fixed IP address or dynamic IP address assigned via DHCP, as
well as a gateway server address and DNS server address from your
service provider.
• A computer equipped with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast
Ethernet card, or a USB-to-Ethernet adapter.
• TCP/IP network protocol installed on each PC that needs to access the
Internet.
• A Java-enabled web browser, such as Microsoft Internet Explorer 5.0 or
above installed on one PC at your site for configuring the Wireless Base
Station.
• Note: Mac users with OS 9.0 or higher may configure the Wireless Base
Station through a browser programme only.

Connect the System

The Wireless Base Station can be positioned at any convenient location in
your office or home. No special wiring or cooling requirements are needed.
You should, however comply with the following guidelines:
• Keep the Wireless Base Station away from any heating devices.
• Do not place the Wireless Base Station in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Wireless
Base Station.
ENGLISH
11

Advertisement

Table of Contents
loading

Table of Contents