Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
Read the Wi-Fi setup instructions on the
app.
3
As instructed, briefly press WI-FI SETUP
on the back of AW1000.
» The power/status indicator starts to
blink amber and white alternately.
» A new Wi-Fi network created by
AW1000 will appear, with the network
name (SSID) of Philips_Install.
EN
10
4
Tap Next on the above app screen, and
then read how to proceed with network
setup.
< 3S
< 30S