Filter Cleaning; Spa Cabinet Maintenance - Viking spas Destiny River Spas 2011 Owner's Manual

• Always leave the cover open for 15 minutes every 30 days to pre-
vent off gas from damaging your spa pillows, cover and other critical
components. Signs of off gas damage include but are not limited to pil-
low peeling and bubbling, discoloration, cover failing prematurely,
plastics or jet inserts failing. Note: These types of failures are not cov-
ered under your warranty.

FILTER CLEANING

(Viking I, Viking II & Viking III)
Your filter should be replaced once a year. When filters are removed
from the spa, make sure that no objects fall into the filter cavity. They
can cause obstruction to water movement. Remove filter cartridges as
shown in figures below.
The filter must be cleaned every month, more often with heavy use, to
get rid of objects and particles that are lodged in the filter pleats.
Using a garden hose with a pressurized nozzle, push water from the
inside to the outside of the filter pleats forcing all trapped particles out.
If the filter is too dirty to be cleaned as described above, obtain filter
cleaner material from your Viking Spa Retailer. Soak the filter
overnight; then hose it down.
A. Locate skimmer. B. Pull weir door open.
C. Remove basket. D. Remove the two separate filters
and follow cleaning instructions above.
SPA COVER MAINTENANCE
Please refer to the cover manufacturers care and maintenance form
included in the box the cover came in. For proper installation of the
cover the tiedown hardware must be installed.
24