Filter Cleaning - Viking spas Spatouch bp501 Owner's Manual

• lways leave the cover open for 15 minutes every 30 days to pre-
vent off gas from damaging your spa pillows, cover and other critical
components. Signs of off gas damage include but are not limited to pil-
low peeling and bubbling, discoloration, cover failing prematurely,
plastics or jet inserts failing. Note: These types of failures are not cov-
ered under your warranty.

FILTER CLEANING

Remove filter face cover by pulling straight up and slightly toward the
spa on front plate/face cover. ( s shown below.) Remove access bas-
ket and unscrew filter cartridge(s) from housing. To reinstall weir door
assembly, door must be placed through throat of skimmer prior to slid-
ing assembly into place. Refer to filter cleaning procedure for Viking IP,
Viking 2P & Viking 3 on previous page. Note: Spas with this filter uti-
lize 50 sq. ft. cartridge filters.
A. Locate skimmer. B. Remove front plate.
C. Remove basket & filters. D. Clean per instructions.
18