Filter Cleaning - Viking spas Viking 1P 120v Owner's Manual

• lways leave the cover open for 15 minutes every 30 days to prevent
off gas from damaging your spa pillows, cover and other critical compo-
nents. Signs of off gas damage include but are not limited to pillow peel-
ing and bubbling, discoloration, cover failing prematurely, plastics or jet
inserts failing. Note: These types of failures are not covered under your
warranty.

FILTER CLEANING

(Viking 1P, Viking 2P & Viking 3)
Your filter should be replaced once a year. When filters are removed
from the spa, make sure that no objects fall into the filter cavity. They can
cause obstruction to water movement. Remove filter cartridges as shown
in figures below.
The filter must be cleaned every month, more often with heavy use, to get
rid of objects and particles that are lodged in the filter pleats. Using a
garden hose with a pressurized nozzle, push water from the inside to the
outside of the filter pleats forcing all trapped particles out. If the filter is
too dirty to be cleaned as described above, obtain filter cleaner material
from your Viking Spa Retailer. Soak the filter overnight; then hose it
down.
A. Locate skimmer. B. Pull weir door open.
C. Remove basket. D. Remove the two separate
filters and follow
cleaning instructions above.
18