Storing Channels In Memory - JVC 0210DTSMDTJEIN Instructions Manual

Checking the satellite radio ID
While selecting "SIRIUS" or "XM"...
] Select "Channel 0."
SIRIUS: SIRIUS identification number is
displayed after "Channel 0" is selected.
XM: The display alternately shows "RADIO ID"
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."

Storing channels in memory

You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number "04."
1
Tune in to a channel you want to store.
(Steps ~ – !,
2
[Hold]
] Shows the "Preset Mode" screen.
3
] Select preset number "4."
• Pressing and holding the number buttons
(1 – 6) can also store the current channel to
the selected number buttons (1 – 6).
24.)
Selecting preset station/category/
channel on the list
1
] Shows the "List" screen.
2
] <Preset / Category / Channel>
If a category is selected, the first channel
of this category is tuned in.
3
] Selects a preset station/category/
channel to listen.
• Pressing the number buttons (1 – 6) can also
select the preset channels (1 – 6).
Using the remote controller
5 U / D ∞ : Changes the
2 R / F 3 : Changes the channels
2 R / F 3
: Changes the channels
[Hold]
Information:
• To know more about SIRIUS Satellite radio
or to sign up, visit <http://www.sirius.com>.
• For the latest channel listings and
programming information, or to sign up
for XM Satellite radio, visit <http://www.
xmradio.com>.
categories
rapidly
ENGLISH 25