JVC 0210DTSMDTJEIN Instructions Manual page 33

Category Menu item
HPF
High Pass
Filter
Beep
Keytouch tone
Amplifier
6
Gain *
Dimmer
Level Meter
8, 9
Scroll * *
Tag Display
LCD Type
6
* The volume level automatically changes to "Vol 30" if you change to <Low Power> with the volume
level set higher than "Vol 30."
7
* The illumination control lead connection is required. (See "Installation/Connection Manual.")
8
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
9
* Not applicable to HD Radio text scrolling.
10
* Depends on the <Dimmer> setting.
Selectable setting, [
Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
• 62Hz/95Hz/ : Frequencies lower than 62 Hz/95 Hz/135 Hz are cut
135Hz off.
• Off : All signals are sent to the front/rear speakers.
• On : Activates the keypress tone.
• Off : Deactivates the keypress tone.
• High Power : Vol 00 – Vol 50
• Low Power : Vol 00 – Vol 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging
the speakers.)
• Auto : Dims the display when you turn on the
headlights. *
• On : Dims the display and button illumination.
• Time Set : Set the timer for dimmer. (
• Off : Cancels.
• Meter 1
: Selects the different level meter patterns. (
• Meter 2
• Press DISP to show the selected level meter.
• Once : Scrolls the displayed information once.
• Auto : Repeats scrolling (at 5-second intervals).
• Off : Cancels.
Pressing DISP for more than one second can scroll the display
regardless of the setting.
• On : Shows the Tag information while playing MP3/
WMA/WAV tracks.
• Off : Cancels.
• Negative : Negative pattern of the display.
• Positive : Positive pattern of the display.
• Auto : Positive pattern will be selected during the day
10
time *
the night time *
Initial: Underlined
7
, while negative pattern will be used during
10
.
]
38)
6)
ENGLISH 33