Advertisement
4.1.9 Setting PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are three degrees:
High, Normal and Low with default value "Normal". The higher degree
indicates that the BUSHNELL TROPHY CAM is more easily triggered by
motion, taking more pictures or recording more videos. It is recommended
to use high sensitivity degree in warmer environments, and to use lower
sensitivity for cooler environments.
The following shows you how to set PIR sensitivity as "Low" provided that
the previous value is "Normal" in MENU state:
a)
b)
c)
22
Trophy 119405+119415 Trail Cams-1LIM-rev2.indd 22
Push the UP or DOWN key until the parameter "Sensor Level"
appears as shown in the Fig. 13(a) and 13(1).
Push the RIGHT or LEFT key until the value changes to "Low" as
shown in the Fig. 13(b) and 13(2).
Press OK key for saving setting or MENU key for canceling
operation and exiting. After pressing OK key the selected value
will be no more highlighted, shown in the Fig. 13(c)
Figure 13: Setting PIR Sensitivity
(a)
(b)
(c)
(1)
(2)
(3)
3/11/2009 9:42:12 AM
Advertisement
