Bushnell TROPHY CAM Instruction Manual page 13

4.1.2 Formatting the SD Card (continued)
Trophy 119405+119415 Trail Cams-1LIM-rev2.indd 13
6(4). Please note, you'll quit the parameter setting without any
saving and no parameter is changed if you press the MENU key
at any time before pressing OK key in step d. After formatting,
you can push the UP or DOWN key to set another parameter, or
push the MENU key for leaving the MENU state.
Figure 6: Formatting An SD Card
(a)
(b)
(c)
(d)
(1)
(2)
(3)
(4)
13
3/11/2009 9:42:10 AM