Download Print this page

Bushnell TROPHY CAM Instruction Manual page 12

Trophy cam
Hide thumbs Also See for TROPHY CAM:

Advertisement

4.1.2 Formatting the SD Card
a) The system will delete all files stored in the SD card after
b) Push the OK key. Then the system will ask you to decide whether
c) If you want to proceed the formatting process, push the RIGHT or
d) Push the OK key to start formatting the SD card. During formatting
12
Trophy 119405+119415 Trail Cams-1LIM-rev2.indd 12
Figure 5: Setting Camera Mode
(a)
(b)
(c)
formatting. Therefore you should make sure that you have made
a backup of important data. In MENU state press UP or DOWN
key until the system enters into the format menu, shown in Fig.
6(a) and 6(1).
to format the SD-card or not, shown in Fig. 6(b) and 6(2).
LEFT key to change the value to [YES]. [YES] will be highlighted,
shown in Fig. 6(c) and 6(3).
the guide information will be changed, shown in Fig. 6(d) and
(1)
(2)
(3)
3/11/2009 9:42:10 AM

Advertisement

loading