Save / Reload Settings - Planet VIP-281SW User Manual

Check new firmware
Scheduling Day
Scheduling Time
Automatic Update
File Prefix
Next update time
Firmware Version

Save / Reload Settings

This page allows you save current settings to a file or reload the settings from the file which was saved
previously. Besides, you could reset the current configuration to factory default.
Save Settings to File
Load Settings from File
Reset Settings to Default
The Router will according to the below ways to check the new
firmware.
- Power On: The machine will check the new firmware
when power on and following the scheduling date and
time.
- Scheduling: The machine will follow the scheduling date
and time to check the new firmware.
The Router will check the new firmware every the interval time.
The range is 1~30 days.
The Router will check the new firmware between the time range
by random.
There are Notify only and Automatic ways to update.
- Notify only: If there are new firmware, the Router will
send the "Be Be Be" sounds when pick up the handset to
prompt there are new firmware.
- Automatic: The Router will carry firmware update out
automatically.
It will check the information of model name.
It will show the next check date and time.
The current firmware version, the Router is use this value to
decide if there is newer firmware version fo upgrading.
Save current settings to a file.
Browse a file and upload to reload settings.
Press Reset will clean all current configurations and return to
default values.
- 60 -