Related Manuals for Qtx QRPA
Summary of Contents for Qtx QRPA
- Page 1 QRPA Portable PA Units Order ref: QR12PA (178.843UK) QR15PA (178.846UK) User Manual VERSION 5.1 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Package Contents Please check the contents to ensure that the product has been received in good condition. • QRPA portable PA unit • 2 x VHF handheld microphones •...
-
Page 3: Rear Panel Layout
23. IEC mains inlet & fuse holder Connection Your new QTX QR-series portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, switch the unit on and check the POWER LED. If it is green, there is charge in the battery. -
Page 4: External Inputs
VHF Wireless Microphones Insert the supplied 9V batteries into the handheld microphones by carefully unscrewing the base of each and connecting the “+” and “-” terminals or the battery to the corresponding clips inside the microphone body, taking care to observe the correct polarity. With the VOL A and VOL B controls turned down, press the VHF ON/OFF button in so that the VHF POWER LED lights. -
Page 5: Internal Media Player
Internal media player The QRPA unit has an inbuilt media player with USB/SD playback, FM tuner and Line input. Panel controls are detailed below… MODE Switches music input between USB/SD player, FM tuner and Line in / VOL- Momentary press for previous track / hold to decrease volume ... -
Page 6: Specifications
Specifications Model QR12PA QR15PA Power supply 220-240Vac 50/60Hz / external 12Vdc / internal battery Main driver 30cm (12”) 38cm (15”) HF unit 2.5cm (1”) titanium compression driver VHF mic frequencies 174.1MHz + 175.0MHz Output power 50W + 50W (LF + HF) Battery life Up to 8 hours Dimensions...