Vantage 17 Cable Accessories/Options; How To Correct Problems In The Machine - Clarke Vantage 17 cable Operator's Manual

Vantage 17 Cable ACCESSORIES/OPTIONS

In addition to the standard components, the machine can be equipped with the following accessories/options, according the
machine specific use:
For further information concerning the above-mentioned optional accessories, contact an authorized Retailer.
ACCESSORIES/OPTIONS
See "Parts List" section.

HOW TO CORRECT PROBLEMS IN THE MACHINE

PROBLEM
The motors do not work
Insufficient recovery water vacuuming
Insufficient solution flow to the brushes
The squeegee leaves streaks on the
floor
Operator's Manual - Vantage 17 Cable
POSSIBLE CAUSE
Power supply cable disconnected from
the electrical mains
Power supply cable faulty
Full recovery tank
Clogged vacuum grid or stuck closed
float
Vacuum hose disconnected from the
squeegee or faulty
Dirty squeegee, or worn or damaged
squeegee blades
Improperly closed recovery tank cover
or worn gasket or clogged vent hole
Dirty solution filter
Clogged recovery tank output hole
Debris under the squeegee blades
Worn, chipped or torn squeegee blades Replace the blades
ENGLISH
ACTION
Connect the power supply cable
Repair/replace the power supply cable
Empty the tank
Clean the vacuum grid and the float
Connect or repair/replace it
Clean the squeegee or replace the
blades
Correctly close the cover or replace the
gasket or clean the vent hole
Clean the filter
Clean the hole
Remove the debris
EN
21