EPOX EP-61BXA-M Manual page 51

EP-61BXA-M
USB Keyboard Support: This controls the activation status of an optional USB
keyboard that may be attached.
The default is disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
OnBoard Primary PCI IDE: This option turns on and off the onboard primary IDE.
The default is enabled.
Enabled: This activates the primary PCI IDE.
Disabled: This disables the primary PCI IDE and frees up the resource.
OnBoard Secondary PCI IDE: This option turns on/off the onboard secondary IDE.
The default is enabled.
Enabled: This activates the secondary PCI IDE.
Disabled: This disables the secondary PCI IDE and frees up its resources.
KBC input clock: This sets the keyboard clock value.
The default is 12 MHz.
Options: 6, 8, 12, 16 are the available choices.
Onboard FDC Controller: This controls the state of the onboard floppy controller.
The default value is Enabled.
Enabled: Enable the Onboard Winbond Chips's floppy drive interface
controller.
Disabled: Disable the Onboard Winbond Chip's floppy drive interface
controller.
Onboard Serial Port 1: This field allows the user to configure the 1st serial port.
The default is Auto.
AUTO: Enable Onboard Serial port 1 and address is Auto adjusted
COM1: Enable Onboard Serial port 1 and address is 3F8H/IRQ4.
COM2: Enable Onboard Serial port 1 and address is 2F8H/IRQ3.
COM3: Enable Onboard Serial port 1 and address is 3E8H/IRQ4.
COM4: Enable Onboard Serial port 1 and address is 2E8H/IRQ3.
Disabled: Disable Onboard SMC CHIP's Serial port 1.
BIOS
Page 4-21