Bios Features Setup - EPOX EP-61BXA-M Manual

EP-61BXA-M
NOTE: The "Halt On:" field is used to determine when to halt the system
by the BIOS if an error occurs.
NOTE: Floppy 3 Mode support is a mode used to support a special 3.5"
drive used in Japan. This is a 3.5" disk that stores only 1.2 MB, the default
setting for this is disabled.

4-2 BIOS Features Setup

Selecting the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY
menu allows users to change system related parameters in the displayed menu. This
menu shows all of the manufacturer's default values for the EP-61BXA-M.
Pressing the [F1] key will display a help message for the selected item.
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Boot UP System Speed
Gate A20 option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Type matic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
Assign IRQ For VGA
OS Select For DRAM > 64MB
Report NO FDD For Win 95
Virus Warning: During and after the system boots up, any attempt to write to the
boot sector or partition table of the hard disk drive will halt the system and an error
message will appear.
You should then run an anti-virus program to locate the virus. Keep in mind that this
feature protects only the boot sector, not the entire hard drive.
The default value is Disabled.
ROM PCI/ISA BIOS(2A69KPA9)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled Video BIOS
: Enabled C8000-CBFFF
: Enabled CC000-CFFFF
: Enabled D0000-D3FFF
: A, C, SCSI D4000-D7FFF
: Disabled D8000-DBFFF
: Enabled DC000-DFFFF
: On
: High
: Fast
: Disabled
: 6
: 250
: Setup
Esc : Quit
: Disabled
: Enabled F1 : Help
: Non-OS2 F5 : Old Values
: NO F7 : Load Setup Defaults
Figure 3: BIOS Features Setup
Shadow : Enabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
Shadow : Disabled
é ê è
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
Page 4-3
BIOS