EPOX EP-61BXA-M Manual page 27

EP-61BXA-M
Reset - Closed to restart system.
J2
1
Speaker - Connect to the system's speaker for beeping
KeyLock - Keyboard lock switch & Power LED connector
J3 1 IR Connector
IDE LED indicator - LED ON when Onboard PCI IDE Hard disks is
+
activate
Turbo LED indicator - LED ON when higher speed is selected
+
Power On/Off - This is connected to the power button on the case.
Using the Soft-Off by Pwr-BTTN feature, you can choose either
Instant Off (turns system off immediatly), or 4 sec delay (you need to
hold the button down for 4 seconds before the system turns off). When
the system is in 4 sec delay mode, EPoX has added a special feature to
make the system go into suspend mode when the button is pressed
momentarily.
1. Speaker 3. GND
2. N/C
1. Power LED(+) 4. Keylock
2. N/C
3. GND
1. VCC
2. NC
3. IRRX
4. GND
5. GND
* The power LED lights when the
system is powered on and blinks in
SLEEP MODE (Suspend mode).
4. GND
5. IRTX
Installation
Page 3-11