Load Setup Defaults; Integrated Peripherals - EPOX EP-61BXA-M Manual

BIOS
Assign IRQ For USB: This item allows BIOS to assign whether IRQ is with USB
or not. If you have not connect the USB device. Can release the IRQ for other
device.
The default is Enabled.
Enalbed: Provides IRQ for USB device.
Disabled: Release IRQ for other device.

4-6 Load Setup Defaults

The "LOAD SETUP DEFAULTS" function loads the system default data directly
from ROM and initializes the associated hardware properly. This function will be
necessary only when the system CMOS data is corrupted.

4-7 Integrated Peripherals

IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA : Auto
Onboard Primary PCI IDE
Onboard Secondary PCI IDE : Enabled
USB Keyboard Support
KBC Input Clock
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard IR Controller
Page 4-18
ROM PCI/ISA BIOS(2A69KPA9)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Auto
: Auto
Parallel Port EPP Type
: Auto
POWER ON Method
: Auto KB Power ON Password
: Auto
: Enabled
: Disabled
: 12MHz
: Enabled
Esc : Quit
: Auto
: Auto F1 : Help
: Disabled F5 : Old Values
F7 : Load Setup Defaults
Figure 8: Integrated Peripherals
Onboard Parallel Port
Onboard Parallel Mode
ECP Mode Ise DMA
: Enter
Hot Key Power ON
EP-61BXA-M
: 378/IRQ7
: ECP / EPP
: 3
: EPP1.9
: Hot Key
: Ctrl-F1
é ê è
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color