Memory Scan Tuning - Kaito KA1102 Manual

from the display for 6 seconds.
4. Press the number button with complete frequency,
the unit will tune into the entered frequency.
You must go to next step in 6 seconds, otherwise the
unit will exit direct entry mode.
If the last frequency number is 0, you can press ENTER
button to supersede input 0.
Example 1: To enter FM89.80MKz,
8 8
9
ENTER
Example 2: To enter SW6.255MHz
2 5
6
ENTER
If a wrong number is entered, press EXIT button to clear it.
If an invalid frequency is entered,
display.
Press EXIT button can exit from frequency entry immediately.
Quickly Input
Before manual scan or auto scan, you can use quickly input
function to quickly go to a frequency range.
Example: The frequency range of FM is 70.00-108.00MHz,
if you enter 100MHz, you can :
1. Select FM band.
2. Press ENTER button.
3. Press number 1, then press ENTER button,
100.00MHz will display.
or 8 8
9
0
ENTER ENTER
5
ERR will flash in the
12

Memory Scan Tuning

¼ Ç Ò ä µ ç Ì ¨
DE1102
POWER
CHARGE
M/ LOCK
FM ST
2
S. STRENGTH
Ð Å
Ö Ç Ä Ü ³ ä µ ç
AM: W/N
º Å
1 2 3
190 Ç ¿
¶ È
/ ³ ¬ Ö Ø µ Í Ò ô
Ö ¸
FM: ST/MONO
Ê ¾
PLL FM STEREO/MW.SW DUAL CONVERSION FM/BASS MW SW/METER
SYNTHESIZED WORLD RECEIVER SSB/190MEMORY/ATS
1. Set the scan method to MEM by press
appears in the display.
2. Press SCAN+ or SCAN- repeatedly to display the desired
preset number.
If you remember the preset page and preset number clearly,
you can press them directly to tune into the station.
After the highest preset number has been scanned, the
unit will return to the smallest preset number and scan
again.
The unit will circulated scan between page 1-6.
13
VOL
ENTER
EXIT
DEL
SCAN
1.
2.
till MEM
9