Power Sources; Operating On Battery - Kaito KA1102 Manual

BAND PRESET.........................................................15
ATS ......................................................................17
COPY FUNCTION.......................................................19
DELETE PRESET STATIONS............................................ 20
RECEIVE SSB & CW.................................................... 21
SET ALARM BY BEEP.................................................... 22
AUTO POWER ON / OFF .......... ................................... 24
SET SLEEP TIME..........................................................26
LOCK FUNCTION.......................................................27
BACK LIGHT FUNCTION ...............................................27
WIDE / NARROW BAND. .............................................. 28
STEREO / MONO / BASS.............................................. 28
AUTO RESET.............................................................. 28
SIGNAL STRENGTH / FM STEREO....................................29
AUDIO OUTPUT..........................................................29
LISTENING WITH EARPHONES....................................... 30
USING FOLDING STAND.............................................. 30
USING ANTENNA....................................................... 31
CAUTIONS................................................................33
SPECIFICATIONS....................................................... 34
INDEX

POWER SOURCES

OPERATING ON BATTERY

BATTERY INSTALLATION
1. Slide the battery lid.
2. Insert three AA batteries with
3. Close the lid of compartment.
BATTERY REPLACEMENT
1. When the sound becomes weak and distorted, and battery
power indicates
otherwise
automatically.
2. All memories (station presets) are permanently stored.
However, when the batteries are removed, the clock reverts
to the default setting of 12:00 and the last beep setting is
cancelled. They need to be reset.
Do not try to recharge dry batteries.
Do not mix old batteries with new ones.
Remove the batteries if the unit will not be used for a
long period of time.
correct polarity as shown in
the compartment.
Disconnect external power source before operating on
battery power.
, replace batteries immediately,
will turn to , then the unit will shut off
1
1 3 2