Operating On Ac Adaptor; Power Indication; Battery Charge - Kaito KA1102 Manual

When the unit is not being used for a long period of time,
remove the batteries to avoid damage from battery leakage
and corrosion.
If battery leakage occurs, wipe the battery compartment
with a soft cloth before inserting new batteries.

OPERATING ON AC ADAPTOR

1. Plug the adaptor into an 220V AC power outlet.
2. Insert the adaptor5s small connector plug into the DC
JACK 23 , appears in the display.
3. Turn on the unit.
If the AC adaptor is connected, the unit automatically
switches to the AC adaptor power, and installed batteries
are no longer in use.
If the adaptor is connected while the backlight is
illuminated, the illumination will remain on.
Remove the batteries if you want to use AC adaptor for
a long period of time.
2
Left Side

POWER INDICATION

The battery power is divided into 4 levels.
Exhausted, auto shut off
Medium
When battery power indicates from
shut off automatically.
While the unit is on, if
rechargeable batteries, batteries need to be charged.

BATTERY CHARGE

1. Install three AA rechargeable batteries with correct polarity.
2. Plug the adaptor into an 220V AC power outlet, c
other side securely to DC Jack
3. With the radio turned off, press the CHARGE button
power indicator will flash for 4 seconds. Press number
button 1..9 to select charging hours according to battery
capacity in flashing time, otherwise the unit will exit from
charge mode.
4. The charging time indicates in the display. When charging has
been completed, the unit stops charging automatically.
If charge time is not been set, the unit will exit from the charge
mode.
Keep the unit off when charging.
Battery charge will be terminated once the unit turns on.
3
Lower
Full
to , the unit will
appears in the display when using
onnect the
.
23
, the
5