Set Sleep Time; Lock Function; Backlight Function - Kaito KA1102 Manual

SET SLEEP TIME

1. Press POWER button to turn on the unit.
a. Set sleep time: while the unit is on, default sleep time 99
and flashes for 2 seconds.
b. Reset the sleep time: after turn on the unit, hold down EXIT
button for 0.5 second, clock indicator
flashing, press enter button to go into sleep set mode.
flashes.
2. While is flashing,
a. Press EXIT button will cancel the sleep function,
disappears.
b. Press ENTER button,
3. Quickly press number button to set the desired sleep time
from 1 to 99 minutes
For example: if your desired sleep time is 60 minutes, direct
press number button 6 & 0, the unit will shut off 60 minutes
later.
ST
97 1
FM
POWER
MEM
M 8 7
/
4. If there isn't any operation in 2 seconds, indicator
appears, the unit will turn off 99 minutes (default time) later.
When sleep time setting is over,
The rest sleep time indicates in FM or MW band.
If there is no further action to next step in 6 seconds, the
unit will exit the sleep time setting, and default 99 minutes
as sleep time.
flashes, while it is
-- appears.
ST
VOL
6 97 1
FM
0
+
MHz MHz
0
MEM
P M 8 7 P
99 60
/
constantly
constantly displays.
26

LOCK FUNCTION

The lock function can be used to avoid any accidental
operation when the unit is being carried or used.
Hold down LOCK button
the display, lock function is activated, all buttons except
LOCK button become inoperative.
Hold down LOCK button for 1 second to cancel lock function.
disappears from the display.
M/ LOCK

BACKLIGHT FUNCTION

There are 3 kinds of back light mode to select: normal,
always-on and backlight off.
VOL
1. Normally, press any button in dark place will start up the
0
backlight of the display and buttons. The backlight will
turn off automatically if no further operation in 8 seconds.
2. When the backlight is illuminated, connect the AC adaptor
will remain the illumination. Disconnect the AC adaptor, the
backlight will off and return to normal mode.
3. With the unit turned off, if you hold down the backlight
button
again to resume.
Backlight consumes little battery power.
for 2 seconds till
12
M/ LOCK
20
for 0.5 second, the backlight will off. Hold down
9
27
appears in
20